Get ready for action as you hear signals that you may never have heard before. The DJ-G7 tunes 0.530-1299.995MHz continuously (cellular blocked), and you can enjoy full duplex receive in combination with the amateur 144/430/1200MHz bands. AM and WFM modes allow you to hear the aviation and broadcast bands and with the broadcast preset memories and built-in AM bar antenna radio listening is easier than ever. Enjoy a variety of scan modes and options that include Time -set scan, 50 pairs of programmable scan memories, Timing adjustable priority scanning and presence of on air signals with Alinco's patented channel-scope. There are also two modes of bug detector functions.

*Restrictions may apply to frequency combinations for Full-duplex QSO.

Customize the DJ-G7 to your personal preferences. Set the parameters to suit your needs and likes. Choose the display language (English/Japanese,) lamp function and display contrast and brightness. Select Auto-Power Off / Battery save function. Turn sounds (beep, bell, end beep) on or off. Set the transmitter for VOX / TOT / BCLO. Control the DTMF burst timing, link your scan banks, set priority scan-timing and memory skip functions and more. Personalize the DJ-G7 to make it, "YOUR DJ-G7".
ALINCO DJ-G7T Features

• Simultaneous full duplex operation of any two bands 144MHz, 430MHz, 1200MHz
• Internal VOX
• Large LCD full dot matrix screen with easy to see and understand display
• Rugged polycarbonate body resists dirt and dust
• High-grade water-resistant materials compatible to IPX7
• Die-cast chassis for rugability and to keep the RF-PA cool.
• Twin "user assignable" controls with easy to use knobs for adjusting AF output and Squelch levels.
• 39 CTCSS and 104 DCS encode/decode. Tone scan to detect unknown tones.
• DTMF Auto-dialer for autopatch access. Up to 16 characters per group in 9 groups.
• SMA antenna port for external antenna use.
• Auto Power-Off, Bell, End-beep, Battery Save function, BCLO and more
• Newly designed EBC-23 Swing belt clip
• High-Capacity EBP-73 Li-ion 1200mAh battery and Drop-In charger are standard.
• Keypad selectable wide / narrow bandwidth and mic gain External DC power port supports 13.8V DC for mobile operation.
• Cloning capability between DJ-G7T units or through PC (optional cable needed)
• Auto-repeater* and conventional repeater operation * For USA repeater systems
• Direct frequency input through illuminated keypad
• 1000 Memory Channels with programmable memory banks
• A free utility software available from alinco.com. ERW-4C or 7 and EDS-10 or 14 required for a PC connection. Use EDS-11 for cable-cloning.

• SPECIFICATIONS
  Frequency Coverage	T-version TX: 144.000 - 147.995MHz / 430.000 - 449.995MHz / 1240.000 - 1299.995MHz Sub-band RX: 0.530 -1299.995MHz (Cellular frequencies 824.000 - 849.995MHz, 869.000 - 894.995MHz blocked on T-version )
  Modulation	TX: F2D/F3E (RX only:WFM,AM)
  Programmable channels	1000 channels + 1 call channel per ham bands+50 programmed-scan pairs+100 dual-memory+100 priority+100 search-pass
  Antenna Impedance	50 ohm unbalanced
  Frequency stability	±2.5ppm
  Power supply requirement	DC 7.4V (EBP-73 Li-Ion battery pack) / DC 9 - 16V (external regulated source)
  Current drain (Approx.)	TX approx. 1.6A/144MHz, 1.8A/430MHz, 0.8A/1200MHz RX approx. 200mA Battery save (1:4) approx. average: Dual 56mA / Single 50mA
  Usable temperature range	+14°F to 113°F (-10°C to +45°C.)
  Ground	Negative
  Dimensions　(Projections not included/approx.)	(W x H x D Projections exclusive): 60 x 115 x 30 mm or 2.36 x 4.53 x 1.18 in.
  Weight	(Antenna/EBP-73 inclusive): Approx. 296 g /9.55 oz
  Certifications	FCC/IC
  TRANSMITTER
  Output power	DC13.8V: 222MHz 5/2/1/0.3W, 902MHz 2.5/1/0.3W
  Modulation system	Variable reactance
  Spurious emissions	Less than －60dB
  Max. frequency deviation	±5kHz
  Mic Impedance	2k Ohms
  RECEIVER
  Receive system	Double-conversion super heterodyne (NFM,AM) Single-conversion super heterodyne (WFM)
  Intermediate frequencies	Main-band: 51.65MHz / 450KHz Sub-band: 50.75MHz / 450KHz Sub-band WFM 10.7MHz
  Sensitivity	144/430MHz ham-radio bands -15dBu or better 1200MHz ham-radio band -13dBu or better Sub-band receiver (Best values): AM (10dB S/N): Lower than 50MHz -1dBu 50MHz and above -6dBu FM (12dB SINAD): 30-470MHz -15dBu 470MHz and above -7dBu WFM 76-470MHz -6dBu 470MHz and above -3dBu
  Selectivity	AM/FM -6dB 12KHz or more / -60dB 35KHz or less WFM -6dB 130KHz or more / -60dB 300KHz or less
  Audio output power	400mW (8ohm 10%THD)
  STANDARD ACCESSORIES
  EBP-73 Li-Ion Battery Pack 1200mAh 7.4V EDC-173 Drop-In Charger stand EDC-170 AC Adapter for EDC-173 charger (not for AC operation) EA-163 Antenna EBC-23 Handstrap (Please be advised that EDH-35 dry-cell case is not included in the packages.)
  OPTIONAL ACCESSORIES
  EDH-35 dry-cell case EDC-36 Cigarette Cable with filter EDC-43 Cigarette Cable with charger EDS-10/EDS-14 Plug Conversion Cable EDS-11 Cloning Cable EME-32A Earphone/Mic (heavy duty) EMS-62 Speaker Mic ERW-4C PC Interface Cable (Serial) ERW-7 or ERW15 USB Programming Data Cable ESC-50 Soft Case RT Systems (APK-G7) Programming software pack